H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 377)

35-4
Figure 35-3 DHCP message format
z
op: Message type defined in option field. 1 = REQUEST, 2 = REPLY
z
htype,hlen: Hardware address type and length of a DHCP client.
z
hops: Number of relay agents a request message traveled.
z
xid: Transaction ID, a random number chosen by the client to identify an IP address allocation.
z
secs: Filled in by the client, the number of seconds elapsed since the client began address
acquisition or renewal process. Currently this field is reserved and set to 0.
z
flags: The leftmost bit is defined as the BROADCAST (B) flag. If this flag is set to 0, the DHCP
server sent a reply back by unicast; if this flag is set to 1, the DHCP server sent a reply back by
broadcast. The remaining bits of the flags field are reserved for future use.
z
ciaddr: Client IP address.
z
yiaddr: 'your' (client) IP address, assigned by the server.
z
siaddr: Server IP address, from which the clients obtained configuration parameters.
z
giaddr: The first relay agent IP address a request message traveled.
z
chaddr: Client hardware address.
z
sname: The server host name, from which the client obtained configuration parameters.
z
file: Bootfile name and routing information, defined by the server to the client.
z
options: Optional parameters field that is variable in length, which includes the message type,
lease, DNS IP address, WINS IP address and so forth.
DHCP Options
DHCP Options Overview
The DHCP message adopts the same format as the Bootstrap Protocol (BOOTP) message for
compatibility, but differs from it in the option field, which identifies new features for DHCP.
DHCP uses the option field in DHCP messages to carry control information and network configuration
parameters, implementing dynamic address allocation and providing more network configuration
information for clients.
Figure 35-4 shows the DHCP option format.