Nortel Networks 1000 - Manual (Page 215)

Clocking Requirement 215
Pre requisites
The pre requisites for connecting an MGC DECT Clock Reference Cable
are the following:
• MGC DECT Clock Reference Cable --- NTDW67AAE5.
Figure 38 "MGC DECT Clock Reference Cable" (page 215) shows
the MGC DECT Clock Reference Cable. It is used to provide clock
reference between CS1000 Media Gateway Cabinet/chassis.
Figure 38
MGC DECT Clock Reference Cable
Connecting MGC DECT Clock Reference Cable
Step Action
1 Connect the MGC DECT Clock Reference Cable to the AUI port
of the back of the MG1000 chassis.
Figure 39 "MG1000 chassis"
(page 215) shows the AUI port of the MG1000 chassis.
Figure 39
MG1000 chassis
2 In the Option 11C Mini chassis or Succession 1.0 MG chassis,
connect to 15-pin DSUB connector on the back panel formerly
used for the 10Base-T AUI connection.
Figure 40 "Option 11C
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 02.06 Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.