Nortel Networks 1000 - Manual (Page 378)

378 NT6D71 UILC line card
U interfaces to connect ISDN BRI-compatible terminals over Digital
Subscriber Loops (DSL) to the CS 1000. For more information on ISDN
BRI, see
“ISDN BRI” (page 368) .
A UILC can reside in a Media Gateway or Media Gateway Expansion. A
maximum of four UILCs are supported in a Media Gateway and Media
Gateway Expansion.
Physical description
The NT6D71 UILC is a standard-size circuit card. Its faceplate is equipped
with an LED to indicate its status.
The NT6D71 UILC is a standard size circuit card designed to be inserted
in peripheral equipment slots in the Meridian 1. Its faceplate is equipped
with an LED to indicate its status.
The NT6D71 UILC is a standard-size circuit card that inserts in slots in the
Media Gateway and Media Gateway Expansion. The NT6D71 UILC can
be installed in slots 1, 2, 3, and 4 of the Media Gateway and slots 7, 8, 9,
and 10 of the Media Gateway Expansion.
The faceplate is equipped with an LED to indicate its status.
Power consumption
Power consumption is +5 V at 1900 mA.
Power consumption is +5V at 1900 mA.
Power consumption is +5 V at 1900 mA.
Functional description
Each U interface provides two B-channels and one D-channel and
supports one physical termination. This termination can be to a Network
Termination (NT1) or directly to a single U interface terminal. Usually, this
physical termination is to an NT1, which provides an S/T interface that
supports up to eight physical terminal connections. The length of a DSL
depends on the specific terminal configuration and the DSL wire gauge;
however, it should not exceed 5.5 km (3.3 mi).
The main functions of the UILC are as follows:
• provide eight ISDN U interfaces conforming to ANSI standards
•
support point-to-point DSL terminal connections
• provide channel mapping between ISDN BRI format (2B+D) and
system bus format
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 02.06 Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.