Overload level, Environmental specifications – Nortel Networks 1000 User Manual

Page 472

Advertising
background image

472

NT8D09 Analog Message Waiting Line card

must be installed. Details on installing protection devices are given in

“Environmental specifications” (page 317)

. Off-premise telephones served

by cable pairs routed through the central office, or crossing a public
right-of-way, can be subject to a requirement for on-card protection, and
MDF protectors may not be acceptable. Check local regulations before
providing such service.

In-circuit protection against power line crosses or lightning is not provided
on the Analog Message Waiting line card. When the Analog line card
is used to service off-premise telephones, the NTAK92 Off-premise
protection module must be used. Check local regulations before providing
such service.

In-circuit protection against power line crosses or lightning is not provided
on the NT8D09 Analog Message Waiting Line Card. When the analog line
card is used to service off-premise telephones, the NTAK92 Off-Premise
protection module must be used. Check local regulations before providing
such service.

Overload level

Signal levels exceeding +7 dBm applied to the tip and ring cause distortion
in speech transmission.

Overload level

Signal levels exceeding +6.5 dBm applied to the tip and ring cause
distortion in speech transmission.

Overload level

Signal levels exceeding +7 dBm applied to the tip and ring cause distortion
in speech transmission.

Overload level

Signal levels exceeding +7 dBm applied to the tip and ring cause distortion
in speech transmission.

Environmental specifications

Table 197 "Analog message waiting line card - environmental
specifications" (page 472)

lists the environmental specifications for the

analog message waiting line card.

Table 197
Analog message waiting line card - environmental specifications

Parameter

Specifications

Operating temperature

0



to +60



C (+32 to +140



F), ambient

Operating humidity

5 to 95% RH (non-condensing)

Storage temperature

–40



to +70



C (–40



to +158



F)

Nortel Communication Server 1000

Circuit Card Reference

NN43001-311

02.06

Standard

27 August 2008

Copyright © 2003-2008 Nortel Networks

.

Advertising