Nortel Networks 1000 User Manual

Page 50

Advertising
background image

50

Overview

Maintenance data is data relating to the configuration and operation of
the IPE card, and is carried on the card LAN link. Some examples of
maintenance data are as follows:

polling

reporting of self-test status

CPU initiated card reset

reporting of card ID (card type and hardware vintage)

reporting of firmware version

downloading trunk interface unit configuration

reporting of trunk interface unit configuration

enabling/disabling of the DS-30X network loop bus

reporting of card status

DS-30X loops

The interfaces provided by the line and trunk cards

connect to conventional 2-wire (tip and ring) line facilities. IPE analog
line and trunk cards convert the incoming analog voice and signaling
information to digital form, and route it to the Common Equipment (CE)
CPU over DS-30X network loops. Conversely, digital voice and signaling
information from the CPU is sent over DS-30X network loops to the analog
line and trunk cards where it is converted to analog form and applied to the
line or trunk facility.

IPE digital line cards receive the data from the digital phone terminal as
512 kHz Time Compressed Multiplexed (TCM) data. The digital line card
converts that data to a format compatible with the DS-30X loop, and
transmits it in the next available timeslot. When a word is received from
the DS-30X loop, the digital line card converts it to the TCM format and
transmits it to the digital phone terminal over the digital line facility.

A separate dedicated DS-30X network loop is extended between each
IPE line/trunk card and the controller cards within an IPE module (or the
controller circuits on a network/DTR card in a CE module). A DS-30X
network loop is composed of two synchronous serial data buses. One bus
transports in the transmit (Tx) direction toward the line facility and the other
in the receive (Rx) direction toward the common equipment.

Each bus has 32 channels for pulse code modulated (PCM) voice data.
Each channel consists of a 10-bit word. See

Figure 12 "DS-30X loop data

format" (page 51)

.

Nortel Communication Server 1000

Circuit Card Reference

NN43001-311

02.06

Standard

27 August 2008

Copyright © 2003-2008 Nortel Networks

.

Advertising