Nortel Networks 1000 - Manual (Page 586)

586 NT8D14 Universal Trunk card
Figure 198
RAN control signals (Control GRD = IDLE)
Note 1: For continuous operation mode, connect the trunk unit MB line
to the announcer B line only, and ground the announcer ST+ line. For
pulse start or level start modes, connect the trunk unit MB line to the
announcer ST+ line only, and leave the announcer B line unconnected.
Note 2: A maximum of 24 universal trunk card units can be paralleled
to a single announcer channel.
Multi-Channel RAN modes
In Multi-Channel RAN, multiple RAN channels can be configured within
one RAN trunk route. In a Multi-Channel RAN route, each trunk has its
own dedicated RAN channel on a physical RAN machine. Multi-Channel
RAN routes do not support the cross connecting (daisy chains) of multiple
trunk ports together so that several callers hear the same RAN message.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 02.06 Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.