Nortel Networks 1000 - Manual (Page 453)

Physical description 453
Figure 118
Analog message waiting line card - faceplate
The analog message waiting line card mounts in any IPE slot. The circuitry
is mounted on a 31.75 cm. by 25.40 cm (12.5 in. by 10 in.) printed circuit
board.
The analog message waiting line card connects to the backplane through a
160-pin edge connector. The backplane is cabled to the Input/Output (I/O)
panel that then connects to the Main Distribution Frame (MDF), also called
a cross-connect terminal through 25-pair cables. Telephones connect
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 02.06 Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.