Btid values by country – Nortel Networks 1000 User Manual
Page 913
Configuration
913
Table 392
LD 14 - Trunk Data Block for NTCK16BX (cont’d.)
Prompt
Response
Description
BTID
(See
Xx
Enter the country busy tone ID:
Tortola, Brazil = 10
Mexico = 10 or 08 (depending on CO)
Singapore = 11
Ireland = 3 or 9 (depending on CO)
Kuwait,Chile, Venezuela, Indonesia,
Thailand,Korea = 06. Argentina = 12 or
07, Turkey = 14
SUPN
(NO) YES
Supervision yes (no)
STYP
BTS
Busy tone supervision enabled
BAT
Loop break supervision enabled
CLS
(LOL) SHL
Attenuation Pads In, (Out)
(DIP) DTN
Digitone signaling, (digipulse)
(P10) P12 P20
Make-break ratio for pulse dialing speed.
Note:
These prompts are required only for the first unit defined on
each NTCK16BX card.
BTID values by country
Country BTIDCadence
Brazil Tortola10250 ms +/- 50 ms on/off
Mexico10250 ms +/- 50 ms on/off
Mexico 8375 ms on/off
Singapore11750 ms on/off
Ireland 3500 +/- 50 ms on/off
Ireland 9375 - 750 ms on/off
Kuwait, Chile 6500 +/- 50 ms on/off
Venezuela, Indonesia12300 ms on, 200 ms off
Thailand, Korea12300 ms on, 200 ms off
Argentina12300 ms on, 200 ms off
Argentina07250 - 500 ms on/off
Turkey1410 seconds of Tone 1:
200 ms off, 200 ms on; 200 ms off,
200 ms on; 200 ms off, 200 ms on;
200 ms off, 600 ms on; followed by
Tone 2: 200 ms off, 200 ms on.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311
02.06
Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.