Media storage, Fixed media drive, Removable media drive – Nortel Networks 1000 User Manual

Page 939: Hard disk drive, Memory, Ethernet interfaces, Elan, Tlan

Advertising
background image

Ethernet interfaces

939

Media storage

Fixed media drive

The fixed media drive (FMD) is a CompactFlash (CF) card that is internal
to the CP PM card. It is accessible only when the CP PM card is removed
from the system. The FMD serves as a hard drive. The Fixed Media Drive
is used when CP PM is a Call Server. It is connected directly to the ATA
controller in the chipset, which is also known as the hard drive controller.

Removable media drive

The removable media drive (RMD) is a hot swappable CF card accessible
from the CP PM faceplate. The CS 1000 software is shipped on a CF card
and is loaded onto the CP PM through the RMD. This drive is also used
for data backups.

Hard disk drive

The CP PM hardware can be used as a platform for the CS 1000 Signaling
Server. When deployed as a signaling server, the CP PM platform is
equipped with a hard disk drive.

Note:

The hard drive must have its jumper set for CSEL operation

before installation.

Memory

The memory controller in the Intel 855 GME graphics memory
controller hub (GMCH) supports one channel of DDR 200/266/333
(PC1600/2100/2700) with error correcting code (ECC). The maximum
capacity of the controller is 2GB. The main memory is comprised of two
200-pin SO-DIMM modules. This facilitates future upgrades.

Ethernet interfaces

There are three Ethernet network interfaces on a CP PM card: HSP, TLAN
and ELAN. The network interfaces are application specific.

ELAN

The ELAN network interface is a 10/100 BaseT port. By default this port
is set to autonegotiate. This network interface is used for both Call Server
and Signaling Server applications.

HSP

The HSP is a 10/100/1000 BaseT network interface that provides standby
Call Server redundancy. By default this network interface is set to
autonegotiate.

TLAN

The TLAN network interface is a 10/100 BaseT port. By default this
network interface is set to autonegotiate. This network interface is used for
Signaling Server applications.

Nortel Communication Server 1000

Circuit Card Reference

NN43001-311

02.06

Standard

27 August 2008

Copyright © 2003-2008 Nortel Networks

.

Advertising