Nortel Networks 1000 - Manual (Page 222)

222 NT5D11 and NT5D14 Lineside T1 Interface cards
where the four-digit address is the two-digit address of the IPE shelf as
set by dip switch positions (dip switch #1, positions 3-6) on the card (as
opposed to the address set in the Meridian 1 software), plus the two-digit
address of the card slot that the motherboard occupies. For example, to
login to a card located in shelf 13, card slot 4, type:
L 13 4 <CR>
A space is inserted between the login command (L), the shelf address, and
the card slot address
The MMI then prompts for a password. The password is "LTILINK", and it
must be typed all in capital letters.
After logging in, the prompt looks like the following:
•
LTI:::> for single-card installations
•
LTI:ss cc> for multi-card installations, where ss represents the
two-digit address, and cc represents the two-digit card slot address
Basic commands
MMI commands can now be executed. There are seven basic commands
that can be combined together to form a total of 19 command sets. They
are:
• Alarm
•
Clear
• Display
• Set
•
Test
•
Help
• Quit
If ?<CR> is typed, the MMI lists the above commands along with an
explanation of their usage. A screen similar to the following appears. The
help screen also appears by typing
H<CR> , or HELP<CR> .
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 02.06 Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.