Physical description, Switch settings – Nortel Networks 1000 User Manual

Page 902

Advertising
background image

902

NTCK16 Generic Central Office Trunk cards

The cards listed below are minimum vintage required to support the
following countries:

NTCK16AA generic Central Office trunk card with PPM

Ireland

NTCK16BC generic Central Office trunk card without PPM.

Brazil

Ireland

Mexico

Tortolla

Singapore

NTCK16AD generic Central Office trunk card with PPM

Turkey

NTCK16BD generic Central Office trunk card without PPM.

Argentina

Turkey

Brazil

Chile

Indonesia

Korea

Venezuela

Throughout this chapter, cards with PPM are identified by the vintage AX.
Cards without PPM are referenced by the vintage BX.

Physical description

The NTCK16AX and NTCK16BX generic Central Office trunk cards uses
eight units. Each unit connects to the shelf backplane through an 80-pin
connector. The backplane is cabled to the I/O panel which is then cabled
to the cross-connect terminal. At the cross-connect terminal, each unit
connects to external apparatus by Tip and Ring leads.

Switch settings

There are no option switches on the NTCK16AX and NTCK16BX generic
Central Office trunk cards. All settings are configured in software.

Nortel Communication Server 1000

Circuit Card Reference

NN43001-311

02.06

Standard

27 August 2008

Copyright © 2003-2008 Nortel Networks

.

Advertising