Nortel Networks 1000 - Manual (Page 484)

484 NT8D14 Universal Trunk card
You can install this card in any IPE slot.In Meridian 1 Option 11C systems
the NT8D14 Universal Trunk Card is installed in slots 1 through 10 of the
Main cabinet, or in slots 11 through 50 in the Expansion cabinets.
Note: Each Media Gateway and Media Gateway Expansion can
contain up to four analog trunk cards.
The NT8D14 Universal Trunk card supports the following trunk types:
• Centralized Automatic Message Accounting (CAMA) trunks
•
Central Office (CO), Foreign Exchange (FEX), and Wide Area
Telephone Service (WATS) trunks
•
Direct Inward Dial (DID) trunks
•
Tie trunks: two-way Loop Dial Repeating (LDR) and two-way loop
Outgoing Automatic Incoming Dial (OAID)
• Recorded Announcement (RAN) trunks
• Paging trunks
The NT8D14 Universal Trunk card also supports Music, Automatic Wake
Up, and Direct Inward System Access (DISA) features.
Table 203 "Trunk and signaling matrix" (page 484) lists the signaling and
trunk types supported by the NT8D14 Universal Trunk card.
Table 203
Trunk and signaling matrix
Trunk types
Signaling type
CO/FX/
WATS DID Tie RAN Paging CAMA
Loop start Yes No
(see no
te)
No N/A N/A Yes
Ground start Yes No No N/A N/A No
Loop DR No Yes Yes N/A N/A No
Loop OAID No No Yes N/A N/A No
Note: For incoming and outgoing service, DID trunks must be programmed as loop dial repeating.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 02.06 Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.