Nortel Networks 1000 - Manual (Page 331)

Physical description 331
Table 128
NTCK79AA cable pins (cont’d.)
Cable Name Description Color
DDP2
pins
NCTE pins
0 R-PRI0TX Trunk 0 Transmit
Ring Red P1-2 P2 shield
0 T-PRI0RX Trunk 0 Receive Tip Green P1-3 P3 inner
conductor
0 R-PRI0RX Trunk 0 Receive Ring Green P1-4 P3 shield
1 T-PRI1TX Trunk 1 Transmit Tip Red P1-5 P4 inner
conductor
1 R-PRI1TX Trunk 1 Transmit
Ring Red P1-6 P4 shield
1 T-PRI1RX Trunk 1 Transmit Tip Green P1-7 P5 inner
conductor
1 R-PRI1RX Trunk 1 Receive Ring Green P1-8 P5 shield
1 Outer metallized PVC
shield Bare N/C P1 Case
1 3 stranded wire Bare N/C P1 Case
Reference clock cables
The NTCG03AA (14 ft), NTCG03AB (2.8 ft), NTCG03AC (4.0 ft), or
NTCG03AD (7 ft), is a DDP2 card to Clock Controller cable, connecting
each of the CLK0 or CLK1 ports on the DDP2 faceplate to the primary or
secondary source ports on Clock Controller card 0 or 1.
Figure 88
NTCG03AA/AB/AC/AD
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 02.06 Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.