Maintenance features, Operation – Nortel Networks 1000 User Manual
Page 665
Operation
665
Maintenance features
The following features are provided for maintenance of the E and M trunk:
•
indication of card status from self-test
•
software enable and disable capability for individual units or entire card
•
loopback of PCM signals to DS-30X for diagnostic purposes
•
card ID for autoconfiguration and determination of serial number and
firmware level
The following features are provided for maintenance of the E and M Trunk:
•
indication of card status from self-test
•
software enable and disable capability for individual units or entire card
•
loopback of PCM signals to DS-30X for diagnostic purposes
•
card ID for autoconfiguration and to determine the serial number and
firmware level of the card
The following features are provided for maintenance of the E and M Trunk:
•
indication of card status from self-test
•
software enable and disable capability for individual units or entire card
•
loopback of PCM signals to DS-30X for diagnostic purposes
•
card ID for autoconfiguration and determination of serial number and
firmware level
Operation
The optional applications, features, and signaling arrangements for
each unit on the E and M Trunk card are assigned through the Trunk
Administration LD 14 and Trunk Route LD 16 programs.
The optional applications, features, and signaling arrangements for
each unit on the E and M Trunk card are assigned through the Trunk
Administration LD 14 and Trunk Route LD 16 programs.
See Software Input/Output Reference — Administration (NN43001-611) for
detailed information on assigning features and services to trunks.
The optional applications, features, and signaling arrangements for
each unit on the E and M Trunk card are assigned through the Trunk
Administration LD 14 and Trunk Route LD 16 programs.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311
02.06
Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.