Nortel Networks 1000 - Manual (Page 494)

494 NT8D14 Universal Trunk card
Figure 128
NT8D14 Universal trunk card - block diagram
The Universal Trunk Card:
• allows trunk type to be configured on a per unit basis
• indicates status during an automatic or manual self-test
•
provides card-identification for auto configuration, and to determine the
serial number and firmware level of the card
•
converts transmission signals from analog-to-digital/digital-to-analog
•
operates in A-Law or µ-Law companding modes on a per unit basis
• provides software selected terminating impedance (600, 900, or 1200
ohm) on a per unit basis (1200 ohm supported for RAN trunks only)
• provides software selected balance impedance (600 ohm or complex
impedance network) on a per unit basis
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 02.06 Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.