System considerations, Connector pin assignments, Figure 247 "nt8d41ba qsdi – Nortel Networks 1000 User Manual
Page 724
724
NT8D41BA Quad Serial Data Interface Paddle Board
Figure 247
NT8D41BA QSDI paddle board block diagram
System considerations
For CS 1000 4.5 and 5.0, in dual-processor systems, the 2 card slots
on the back of a CoreNet shelf supporting CP PII and CP PIV function
regardless of which CPU is active. On Release 5.0 only the CP PII and
CP PIV are supported. In Options 61C and 81C, CS 1000SG, and CS
1000MG, four NT8D41BB can be provisioned for a total of 16 SDI ports.
One port is used for power monitoring, leaving 15 for customer use.
Connector pin assignments
The RS-232-C signals for port 1 through port 4 are brought out on
connector J1 through J4 respectively. The pinouts for each port are
identical to those for each of the other three ports.
J1, J2, J3, and J4 pin assignments" (page 725)
shows the pin assignment
that applies to each connector.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311
02.06
Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.