Nortel Networks 1000 - Manual (Page 922)

922 NTDK20 Small System Controller card
Figure 263
NTDK99A single-port 100BaseT IP daughterboard
Table 395
Expansion daughterboards
Daughterboard
Number
of ports
Cable type
Max. distance between Call
Server and Media Gateway
systems
NTDK99 (used in
Media Gateway) one
NTDK83 (used in
Call Server two
Use the supplied
NTTK34AA UTP
CAT 5 RJ-45 2 m
cross-over cable
to connect the
Call Server and
Media Gateway
using the 100BaseT
daughterboards.
The NTTK34AA
cross-over cable must
be used if connecting
point-to-point.
Media Gateways can be located
up to 100 m (328 ft.) from
the Call Server if connected
point-to-point, or up to 40 km (24
miles) from the Call Server if a
third party converter is used to
convert to fiber.
Note: If not connecting point-to-point, connect the Call Server and
Media Gateway using a straight-through Ethernet UTP Cat 5 cable.
Call Servers can be connected to Media Gateway in the following ways:
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 02.06 Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.