GE Industrial Solutions EntelliPro ES User Manual

Page 178

Advertising

CHAPTER 4: COMMUNICATION

EP OS MOTOR MANAGEMENT SY STEM – INSTRUCTION MANUAL

4.41

Size

Telegram Name

Description

Default

Bytes

Unit

Scale

2 * 8-bit

B30008

Failure Telegram

BIT0 - Overload Failure

BIT1 - Phase Loss Failure

BIT2 - Ground Fault Failure

1 indicates Overload Failure (Trip)

1 indicates Phase Loss Failure (Trip)

1 indicates Ground Fault Failure (Trip)

BIT3 - Unbalanced Load Failure

BIT4 - Thermistor Failure

BIT5 - Emergency Stop Failure

BIT6 - Limit Switch Failure

BIT7 - Safety Circuit Failure

BIT0 - Main Circuit Failure

BIT1- Control Circuit Failure

IT2 - Switch Position (relay feedback) Failure

BIT3 - Under Load Current Failure

BIT4 - Overload / lock rotor etc Current Failure

BIT5 - External Supervision Failure

BIT6 - Long Start Failure

BIT7 - Typical Specific Failure

1 indicates Phase Unbalance Failure (Trip)

1 indicates Thermistor Failure (Trip)

1 indicates Emergency Stop Failure (Trip). Input must be mapped.

1 indicates Limit Switch failure - applicable to solenoid & actuator
typicals only.

1 indicates safety circuit failure. Input must be mapped.

1 indicates Main circuit failure. Input must be mapped.

1 indicates control circuit failure. Input must be mapped.

1 indicates contactor feedback position failure. Input must be
mapped.

1 indicates underload current failure (Trip).

1 indicates overload/lock motor failure.

1 indicates supervision circuit failure.

1 indicates long start.

Used on custom logic only.

2 * 8-bit

B30264

Warning Telegram

BIT0 - Overload Warning
BIT1 - Phase Loss Warning
BIT2 - Ground Fault Warning

BIT3 - Unbalanced Load Warning

BIT4 - Thermistor Warning

BIT5 - Emergency Stop Warning

BIT6 - Limit Switch Warning

BIT7 - Safety Circuit Warning

1 indicates Overload warning

1 indicates Phase Loss warning

1 indicates Ground Fault warning

1 indicates Phase Unbalance warning

1 indicates Thermistor warning

BIT0 - Main Circuit Warning

BIT1 - Control Circuit Warning

BIT2 - Contactor Feedback Warning
BIT3 - Under Load Current Warning
BIT4 - Over Load Current Warning
BIT5 - External Supervision Warning
BIT6 - Long Start Warning

BIT7 - Typical Specific Warning