Control variant 5 configuration – GE Industrial Solutions EntelliPro ES User Manual
Page 43
Advertising
CHAPTER 2: INSTALL ATION/CONFIGURATION
2.18
EP OS MOTOR MANAGEMENT SYSTEM – INSTRUCTION MANUAL
Control Variant 5 Configuration
Profibus Class1 master is disabled. Modbus is configured as remote source and hardwire has the control
of the “local-remote-off”
switch.
Profibus Class1 bus failure detection is disabled.
Modbus failure has no effect on switch
position. Refer to Figure 2-9.
Figure 2-9: Control variant 5 configuration
Advertising