Control variant 3 configuration – GE Industrial Solutions EntelliPro ES User Manual
Page 41
Advertising
CHAPTER 2: INSTALL ATION/CONFIGURATION
2.16
EP OS MOTOR MANAGEMENT SYSTEM – INSTRUCTION MANUAL
Control Variant 3 Configuration
Profibus Class1 master is enabled, configured as remote source, and Modbus has the control of the
“local-remote-off”
switch.
Profibus Class1 bus failure detection is enabled. On Class1 bus failure, has no effect on the switch
position. On Modbus failure the switch position is forced to local position.
Refer to Figure 2-7.
Figure 2-7: Control variant 3 configuration
Advertising