GE Industrial Solutions EntelliPro ES User Manual
Page 199
Advertising
CHAPTER 5: WinESG
EP OS MOTOR MANAGEMENT SY STEM – INSTRUCTION MANUAL
5.3
Step 5: Right click on "Segment0" and select Properties to set up the Profibus system. The WinESG Profibus -DP parameter
must fit to the Profiibus-DP C1 communication parameter in SCADA system else communication problems can appear.
.
NOTE
: The configuration must not be activated when WinESG starts up.
The WinESG will start the OPC server automatically.
NOTE:
WinESG only communicates with Profibus-DP devices, which are included in the Softing OPC configuration.
Step 6: Save the project by selecting File, Save.
Step 7: Right click on "Segment0" and select Properties to set up the Profibus system.
Advertising