GE Industrial Solutions EntelliPro ES - Manual (Page 194)

The Profibus-DP line is green, all parameters and configuration is ok. The cyclic Profibus-DP communication is running
and the configured data change is possible
showing an overview of the cyclic Profibus-DP communication. Data such as status information, assigned PB-C1 master and
Profibus-DP Ident Number are shown per the figure below.
To see the current status of the EntelliPro ES device, click on the device. The correspondence diagnostic window opens
Profibus-D.
CHAPTER 4: COMMUNICATION
CHAPTER 4: COMMUNICATION
Profibus-DP communication is not running and no data change is possible.
4.57 EPOS MOTOR MANAGEMENT SYSTEM – INSTRUCTION MANUAL