GE Industrial Solutions EntelliPro ES User Manual
Page 40
Advertising
CHAPTER 2: INSTALL ATION/CONFIGURATION
EP OS MOTOR MANAGEMENT SY STEM – INSTRUCTION MANUAL
2.15
Control Variant 2 Configuration
Profibus Class1 master is enabled, configured as remote source, and hardwire has the control of the
“local-
remote-off”
switch.
Profibus Class1 bus failure detection is enabled. Class1 bus failure does not affect switch position. Modbus
failure has
not
affected the on switch position.
Refer to Figure 2-6.
Figure 2-6:Control variant 2 configuration
Advertising