Control variant 1 configuration – GE Industrial Solutions EntelliPro ES User Manual
Page 39
Advertising
CHAPTER 2: INSTALL ATION/CONFIGURATION
2.14
EP OS MOTOR MANAGEMENT SYSTEM – INSTRUCTION MANUAL
Control Variant 1 Configuration
Profibus Class1 master is enabled, configured as remote source, and has the control of the “local-
remote-off” switch.
Profibus Class1 bus failure detection is enabled. On Class1 bus failure, switch position is forced to
local position.
Modbus failure has not affected the on switch position.
Refer to Figure 2-5.
Figure 2-5: Control variant 1 configuration
Advertising