Control variant 4 configuration – GE Industrial Solutions EntelliPro ES User Manual
Page 42
Advertising
CHAPTER 2: INSTALL ATION/CONFIGURATION
EP OS MOTOR MANAGEMENT SY STEM – INSTRUCTION MANUAL
2.17
Control Variant 4 Configuration
Profibus Class1 master is disabled. Modbus is configured as remote source and has the control of the “local-
remote-off”
switch.
Profibus Class1 bus failure detection is disabled.
On Modbus` failure the switch position is forced to local position
Refer to figure 2-8
Figure 2-8: Control variant 4 configuration
Advertising