GE Industrial Solutions EntelliPro ES - Manual (Page 224)

CHAPTER 5: WinESG
EP OS MOTOR MANAGEMENT SYSTEM – INSTRUCTION MANUAL 5.2 8
5.3. 3
5.3.2.15 Alarm panel
Debug panel
T h
selected then click Reset.
To view fault, warning, and device error details click on Details. To reset a particular fault, the fault type must be
The alarm panel shown below, provides the EntelliPro ES status and the capability to reset faults, warnings and device errors.
e debug panel provides a means to fully test the custom logic. It shows the actual state of the EntelliPro ES
logic variables. The data is only valid when the parameter “debug mode” is activate d in the
parameterization/function panel window.
NOTE: The debug mode should be activated only for test purpose s.
The value of the variable is displayed in colour with the following meaning:
Red: variable is TRUE.
Black: variable is FALSE.
Grey: status unknown (check communication)
Refer to Figure 5-1
8 for the WinESG debug panel.
Figure 5-1
8: WinESG parameterization debug panel