GE Industrial Solutions EntelliPro ES - Manual (Page 234)

CHAPTER 5: WinESG
EP OS MOTOR MANAGEMENT SYSTEM – INSTRUCTION MANUAL 5.3 8
5.4.2 Analog Data Capture panel
The analog data capture panel provides a means to view phases A, B, and C, and average currents of RMS samples
based on trigger configuration set on the parameterization/device setting panel. If the trigger is set to Manual, by
pressing the “Start recording“ button the current can be viewed. Refer to figure 5-20 for the WinESG RMS analog
current.
Data is automatically saved in a file. Previous saved waveforms can be retrieved using the “Open“ button. Right, left,
zoom in, and zoom out buttons are provided to navigate thru the data.
Figure 5-20: WinESG analog data capture panel