GE Industrial Solutions EntelliPro ES - Manual (Page 249)

EPOS MOTOR MANAGEMENT SYSTEM – INSTRUCTION MANUAL
CHAPTER 6: ENTELLIPRO CP3 and CP5 APPLICATION
are used when EntelliPro CP5 starts.
The Modbus RTU address range is 1 to 247. All addresses are stored permanently in the CP5 panel. These addresses
same address.
6.7 EntelliPro CP5 device addresses
The “Device configuration” setting is protected with a user level password “22222222”.
6.14
For each device in the system, a unique a Modbus RTU address must be assigned. No two devices can have the
The device setting menu, shown in the figure below, can be accessed by pressing function key “F5” from root menu.