Spectra Precision ProFlex 800 Reference Manual User Manual
Page 103
89
Using the Web Server
The non-alignment of the baseline with the vehicle centerline
may be intentional (see explanations in the next section
below).
Correlation Between Azimuth Offset, Antenna Setup &
Measurements Made
Consider the following four setups before installing your
antennas. A ship is shown in the examples but this could be
any other type of vehicle.
Depending on the type of measurements you wish the
receiver to perform (heading+roll or heading+pitch) and the
installation possibilities offered in the vehicle, you will
choose the most appropriate setup and set the azimuth offset
accordingly.
V
ehicle
C
e
nt
erline
Azimuth Offset (°)
Antenna #2
Antenna #1
Baseline
Dir
e
ct
ion
F
o
rw
ar
d mo
v
emen
t
Antenna #1
Antenna #2
Azimuth Offset= 0°
Antenna #2
Antenna #1
Azimuth Offset= 180°
Antenna #2
Azimuth Offset= 270°
Antenna #1
Antenna #1
Azimuth Offset= 90°
Antenna #2
Heading+Roll
Computed
Heading+Pitch
Computed
(Red arrow indicates the direction for which heading is measured.)