Spectra Precision ProFlex 800 Reference Manual - Manual (Page 619)

605
Query Command Library
Example
$PASHQ,RCP,OWN*4C
$PASHR,RCP,OWN,PROFLEX800*01
RCP,REF: Reference Receiver Name
Function This command is used to query the receiver for the name
assigned locally to the base receiver from which the
differential stream is received.
Command Format Syntax
$PASHQ,RCP,REF[*cc]
Parameters
None.
Response format Syntax
$PASHR,RCP,REF,s1,d2*cc
Parameters
Example
$PASHQ,RCP,REF*4B
$PASHR,RCP,REF,ASHTECH,0*38
*cc Optional checksum *00-*FF
Parameter Description Range
Parameter Description Range
s1 Reference receiver name
d2
Receiver name preference:
• 0: s1 is ignored if the incoming reference
data contain the reference receiver name
• 1: s1 is always used and the decoded ref-
erence receiver name is ignored.
0, 1
*cc Optional checksum *00-*FF