Spectra Precision ProFlex 800 Reference Manual - Manual (Page 681)

667
Query Command Library
Relevant Set
Command
$PASHS,ZDA
See also $PASHS,LTZ
$PASHS,NME
Automatic Output
of ZDA Messages
This is a reminder on how to output ZDA messages at regular
intervals of time: Use the $PASHS,NME command with the
syntax below:
$PASHS,NME,ZDA,<port_ID>,ON,<Rate>
For more details on the $PASHS,NME command, refer to the
Set Command Library Chapter.
As an example, the command below will output ZDA
messages on port A at a rate of 60 seconds:
$PASHS,NME,ZDA,A,ON,60