Spectra Precision ProFlex 800 Reference Manual - Manual (Page 469)

455
Set Command Library
Parameters
Comments
• The headers of the RINEX files are built using the
information provided through $PASHS,RXC,PAR.
• The resulting RINEX files are stored in the same folder as
the one containing the G-file specified in the command.
• $PASHR,NAK is returned if the specified file does not
exist, or is not a G-file.
• $PASHR,ACK is returned when the command is accepted,
then $PASHR,RXC,OK or $PASHR,RXC,FAILED,
depending on whether the conversion respectively
succeeded or failed.
Examples
Converting a G-file to Rinex (in the same folder):
$PASHS,RXC,RUN,,,GabcdA09.241*67
$PASHR,ACK*3D
$PASHR,RXC,OK*15
Converting a G-file to Rinex and saving the resulting file in a
sub-folder:
$PASHS,RXC,RUN,2,2009/241,GabcdA09.241*46
$PASHR,ACK*3D
$PASHR,RXC,OK*15
Relevant Query
Command
None.
See Also $PASHS,RNX,PAR
$PASHS,MEM
Parameter Description Range Default
d1
Memory location:
• 0: Internal memory
• 2: USB device
If d1 is omitted, the receiver
looks for the specified file on the
memory last selected with
$PASHS,MEM.
0 or 2 0
s2
Path on the selected memory
where to find the G-file.
255 characters max. -
s3
File name. No path allowed in
this field. 13 characters in the
form “GxxxxSyy.ddd”
-
*cc Optional checksum *00-*FF