Spectra Precision ProFlex 800 Reference Manual - Manual (Page 447)

433
Set Command Library
$PASHS,RCP,DEL,MyReceiver*74
Relevant Query
Command
$PASHQ,RCP
See Also $PASHS,RCP,GB1
$PASHS,RCP,GB2
RCP,REF: Naming Reference Receiver
Function This command is used to enter the reference receiver name.
Command Format Syntax
$PASHS,RCP,REF,s1[,d2][*cc]
Parameters
Comment
The supported receiver models are listed below (these are
case-sensitive names):
ASHTECH
ProMark500
ProMark800
ProFlex500
ProFlex800
MB500
PM5
BP1
MB800
Parameter Description Range Default
s1 Receiver name (case-sensitive).
31 characters
max.
Empty
d2
Receiver name preference:
• 0: s1 is ignored if the incoming refer-
ence data contain the reference
receiver name
• 1: s1 is always used and the decoded
reference receiver name is ignored.
0 or 1 0
*cc Optional checksum *00-*FF