Spectra Precision ProFlex 800 Reference Manual - Manual (Page 552)

538
Query Command Library
Parameters
Examples
$PASHQ,DIP
$PASHR,DIP,RIP,192.65.54.1,PRT,80,IPP,P*xx
$PASHQ,DIP
$PASHR,DIP,RIP,www.ashtech.com,PRT,8080,IPP,Q*xx
Relevant Set
Command
$PASHS,DIP
See also $PASHQ,MDM
DPO: Delta Position
Function This command is used to output a DPO message containing
the components of the last computed vector (baseline) as
well as other information about the position solution.
Command Format Syntax
$PASHQ,DPO[*cc]
Response Format Syntax
$PASHR,DPO,d1,d2,m3,f4,c5,f6,c7,f8,c9,f10,f11,f12,f13,f14,f15,f16,s17*cc
Parameter Description Range
RIP,s1
IP address
(xxx.xxx.xxx.xxx) or host
name IP address:
000.000.000.000 to 255.255.255.255
or host name
PRT,d2 Port number 0-65535
LGN,s3 User name (optional) 20 char. max.
PWD,s4 Password (optional) 20 chars max.
IPP,c6
Internet port used on the
receiver to establish the
connection with the base
(server):
• E: Internal modem
(default)
• P: Ethernet stream 1
• Q: Ethernet stream 2
E, P, Q
*cc Checksum *00-*FF