Relevant query command, See also, Exm,off: disabling the extended internal memory – Spectra Precision ProFlex 800 Reference Manual User Manual
Page 396: Function, Command format, Exm,on: enabling the extended internal memory
382
Set Command Library
Relevant Query
Command
$PASHQ,ETH
See Also
$PASHS,ETH,OFF
$PASHS,ETH,ON
EXM,OFF: Disabling the Extended Internal Memory
Function
This command is used to disable the use of the extended
internal memory. By default, the use of this memory is
enabled.
Disabling the extended internal memory results in having port
M re-allocated to the NAND Flash memory.
The receiver will reboot after having received and run this
command.
Command Format
Syntax
$PASHS,EXM,OFF[*cc]
Parameters
None.
Example
Disabling the use of the extended internal memory:
$PASHS,EXM,OFF*46
Relevant Query
Command
$PASHQ,EXM
See Also
$PASHS,EXM,ON
EXM,ON: Enabling the Extended Internal Memory
Function
This command is used to enable the use of the extended
internal memory. (Enabling the use of this memory implies
that you have purchased this hardware option.)
The command will be NAKed if the extended internal memory
is not detected.