Spectra Precision ProFlex 800 Reference Manual - Manual (Page 299)

285
Ethernet Connection
In this configuration, the IT Manager should take all the
necessary steps for the remote system to be able to access
the ProFlex 800 through the public IP address of the local
network. The IP address read on the receiver display screen
is NOT the one to be provided to the remote system.
It will therefore be the responsibility of the IT Manager to
provide the receiver administrator with the appropriate
connection information (<IP address:port number> or host
name). Once again, if DHCP is used, an account may be
opened on DynDNS.com to track the dynamic IP address
assigned by the ISP to the receiver’s public access point. See
Creating an Account on Dyn.com on page 91.
Using the Ethernet Port
Introduction The ProFlex 800 Ethernet port can be used simultaneously
for various purposes. The different uses are summarized in
the diagram below.