Spectra Precision ProFlex 800 Reference Manual - Manual (Page 328)

314
Set Command Library
the receiver, the predefined parameters can be listed
using $PASHQ,ANP. New offset parameters can be added
using $PASHS,ANP,PCO.
• The predefined list complies with the IGS antenna source
table.
• The antenna name (and the optional serial number and
setup ID) are also inserted into the RTCM antenna
message when the receiver is used as a base.
Example
Entering “ASH111661” as the name of the receiver antenna
name and “201115864” as the receiver serial number:
$PASHS,ANP,OWN,ASH111661,201115864*36
Relevant Query
Commands
$PASHQ,ANP
$PASHQ,ANP,OWN
See Also $PASHS,ANP,REF