Spectra Precision ProFlex 800 Reference Manual - Manual (Page 592)

578
Query Command Library
Command Format Syntax
$PASHQ,MDM,LVL[*cc]
Response Format Syntax
$PASHR,MDM,LVL,d*cc
Parameters
Example
$PASHQ,MDM
$PASHR,MDM,LVL,-1*7A
See also $PASHQ,MDM
MDM,STS: Modem Status
Function This command queries the receiver for the current status of
the internal modem.
Command Format Syntax
$PASHQ,MDM,STS[*cc]
Response Format Syntax
$PASHR,MDM,STS,s1,s2,s3,d4*cc
Parameters
Parameter Description Range
d
Current signal level:
• 0-100: Signal level. The higher the number, the
higher the signal level.
• “-1”: No signal available.
0 to 100
-1
*cc Checksum *00-*FF
Parameter Description Range
s1
Modem status.
“NONE” means that the [Z] option
(MODEM) is not valid.
OFF, ON, INIT, DIALING,
ONLINE, NONE
s2 Name of the network currently used -
s3
Network type currently used (2G or
3G)
2G, 3G