Spectra Precision ProFlex 800 Reference Manual - Manual (Page 378)

364
Set Command Library
Command Format Syntax
$PASHS,DIP,OFF[,c1][*cc]
Parameters
Examples
Terminating the current connection:
$PASHS,DIP,OFF*4B
Relevant Query
Command
$PASHQ,MDM
See also $PASHS,DIP
$PASHS,DIP,PAR
$PASHS,DIP,ON
DIP,ON: Establishing the Programmed Direct IP Connection
Function This command is used to establish the programmed Direct IP
connection.
Command Format Syntax
$PASHS,DIP,ON[,c1][*cc]
Parameter Description Range
c1
IP port used for the connection to the server:
• E: Internal modem
• P: Ethernet stream 1
• Q: Ethernet stream 2
When c1 is omitted, the concerned port is
the one specified in the last $PASHS,DIP,
PAR or $PASHS,DIP command run.
E, P, Q
*cc Optional checksum *00-*FF