Spectra Precision ProFlex 800 Reference Manual - Manual (Page 335)

321
Set Command Library
Comment • If the memory selected through $PASHS,MEM is
unavailable, then “ACK” is returned in response to the
command enabling recording (ON or AUT), prompting you
to read the status of the debug data recording using the
$PASHQ,ATL command.
Relevant Query
Command
$PASHQ,ATL
See Also $PASHS,MEM
ATM: Enabling/Disabling ATOM Messages
Function This command allows you to enable or disable ATOM
messages on the specified port. For more details about the
ATOM format, please refer to the AshTech Optimized
Messaging (ATOM) Reference Manual.
Command Format Syntax
$PASHS,ATM,s1,c2,s3[,f4][*cc]