Relevant set command, See also, Sti: station id – Spectra Precision ProFlex 800 Reference Manual User Manual
Page 659: Function, Command format, Response format
Advertising
645
Query Command Library
Example
$PASHQ,SOM,WRN
$PASHR,SOM,WRN,ON,ON*42
Relevant Set
Command
$PASHS,SOM,WRN
See Also
$PASHS,SOM
STI: Station ID
Function
This command is used to query the receiver for the station ID
it transmits to the rover through the corrections message.
Command Format
Syntax
$PASHQ,STI[*cc]
Response Format
Syntax
$PASHR,STI,d*cc
Parameters
Example
$PASHQ,STI
$PASHR,STI,817*28
Relevant Set
Command
$PASHS,STI
Parameter
Description
Range
d
Station ID
0-1023 (RTCM 2.3)
0-4095 (RTCM 3.x)/ATOM
0-31 (CMR & CMR+)
*cc
Checksum
*00-*FF
Advertising