Spectra Precision ProFlex 800 Reference Manual - Manual (Page 470)

456
Set Command Library
SBA: Enabling/Disabling SBAS Tracking
Function This command is used to enable or disable SBAS tracking.
Command Format Syntax
$PASHS,SBA,s1[*cc]
Parameters
Example
Enabling SBAS tracking:
$PASHS,SBA,ON*08
Relevant Query
Command
$PASHQ,SBA
See also $PASHS,GLO
SBA,MAN: Manual Selection of SBAS Satellites
Function This command is used to select the two SBAS satellites the
receiver is only allowed to work with.
You may use $PASHQ,PAR to view the current selection of
SBAS satellites.
Command Format Syntax
Choosing two SBAS satellites:
$PASHS,SBA,MAN,d1,d2[*cc]
Returning to automatic selection of SBAS satellites:
$PASHS,SBA,AUT[*cc
Parameter Description Range Default
s1
Enables (ON) or disables (OFF)
SBAS tracking
ON, OFF ON
*cc Optional checksum *00-*FF