Response format, Relevant set command, Ntr: ntrip settings – Spectra Precision ProFlex 800 Reference Manual User Manual
Page 598: Function, Command format
584
Query Command Library
Response Format
Syntax
$PASHR,NPT,d1,d2*cc
Parameters
Example
$PASHQ,NPT
$PASHR,NPT,0,0*3E
Relevant Set
Command
$PASHS,NPT
NTR: NTRIP Settings
Function
This command is used to read the current NTRIP settings.
When c6 is omitted in the query command, the returned
NTRIP settings are those for the port defined through the
$PASHS,NTR,PAR command last run.
Command Format
Syntax
$PASHQ,NTR[,c6][*cc]
Response Format
Syntax
$PASHR,NTR,ADD=s1,PRT=d2,LGN=s3,PWD=s4,TYP=d5,IPP=c6*cc
Parameter
Description
Range
d1
Code assigned to SBAS differential position solution in
NMEA-like messages (CRT, DCR, DPO, POS, VEC):
• 0: Code “1”
• 1: Code “9”
0,1
d2
Code assigned to SBAS differential position solution in
NMEA messages (GGA):
• 0: Code “2”
• 1: Code “9”
0, 1
*cc
Optional checksum
*00-*FF