Spectra Precision ProFlex 800 Reference Manual - Manual (Page 363)

349
Set Command Library
CPD,REM: Differential Data Port
Function This command sets the reception mode for all differential
data.
If Automatic is chosen, all received differential data is
processed whatever the input ports.
On the contrary, if Manual is chosen, only the data coming in
through the specified ports (one or two ports) will be
processed.
Command Format Syntax
$PASHS,CPD,REM,s1[,c2][,c3][*cc]
Parameters
Examples
Setting the receiver to receive and process differential data in
Automatic mode:
$PASHS,CPD,REM,AUT*38
Setting the receiver to receive and process differential data in
Manual mode with the data received on port D:
$PASHS,CPD,REM,MAN,D*52
Relevant Query
Command
$PASHQ,CPD,REM
Parameter Description Range Default
s1
Reception mode:
• AUT: Automatic (default)
• MAN: Manual
AUT, MAN AUT
c2
Input port #1:
• A B, F: Serial port
• C: Bluetooth port
• I, P, Q: Ethernet port
• D: Radio
• E: Modem
A, B, C, D, E, F, I, P, Q
c3
Input port #2:
• A, B, F: Serial port
• C: Bluetooth port
• I, P, Q: Ethernet port
• D: Radio
• E: Modem
A, B, C, D, E, F, I, P, Q
*cc Optional checksum *00-*FF