Spectra Precision ProFlex 800 Reference Manual - Manual (Page 419)

405
Set Command Library
See Also $PASHS,MET,CMD
$PASHS,MET,INIT
$PASHS,MET,PAR
$PASHS,OUT,x,MET
MWD: Setting the Modem Timeout
Function This command is used to set the modem watchdog timeout.
This parameter refers to the time during which the modem
connection is active but no data is sent or received through
the modem port. In case of timeout, the modem will hang up
automatically.
Command Format Syntax
$PASHS,MWD,d[*cc]
Parameters
Example
Setting the timeout to 5 minutes:
$PASHS,MWD,5*32
Relevant Query
Command
$PASHQ,MWD
See also $PASHS,MDM,PAR
$PASHQ,FLS
Parameter Description Range Default
d
Timeout setting:
• 1-99: Modem timeout in minutes.
• 0: No timeout
0-99 0
*cc Optional checksum *00-*FF