Pwr,off: powering off the receiver, Function, Command format – Spectra Precision ProFlex 800 Reference Manual User Manual
Page 439: Relevant query command, Pwr,par: power management
425
Set Command Library
PWR,OFF: Powering Off the Receiver
Function
This command is used to power off the receiver.
Command Format
Syntax
$PASHS,PWR,OFF[*cc]
Parameters
None.
Example
Turning off the receiver:
$PASHS,PWR,OFF*43
Relevant Query
Command
None.
PWR,PAR: Power Management
Function
This command is used to set the voltage thresholds triggering
low-power alarms and to set the lower and upper limits of
power voltage for which the receiver will be powered on or off
automatically if the DC voltage applied to the external power
input is respectively within or out of these limits (making this
second function operational requires that the slide switch
located at the bottom of the compartment be pushed to the
right).
Command Format
Syntax
$PASHS,PWR,PAR,f1,f2[,[f3],[f4]][*cc]