Spectra Precision ProFlex 800 Reference Manual - Manual (Page 482)

468
Set Command Library
$PASHS,SES,SET,s1,c2,d3,d4,f5,d6[*cc]
Parameters
Example
Setting 2nd session, with flag on, starting at 10:00 am and
finishing at 11:00 am, with a recording rate of 1 second:
$PASHS,SES,SET,B,Y,1000,1100,1*59
Relevant Query
Command
$PASHQ,SES
See Also $PASHS,SES,PAR
$PASHS,SES,DEL
$PASHS,SES,AUT
SIT: Defining a Site Name
Function This command is used to define a site name that will be used
in the naming of the next logged raw data file.
Command Format Syntax
$PASHS,SIT,s[*cc]
Parameter Description Range Default
s1 Session name
A-X (sessions 1-24)
AA-XA (sessions 25-48)
AB-XB (sessions 49-72)
AC-XC (sessions 73-96)
c2
Session recording flag:
• Y: Recording is allowed
during the session.
• N: No data recording is
allowed during the ses-
sion.
Y, N N
d3 Session start time (hhmmss) 000000-235959 000000
d4 Session end time (hhmmss) 000000-235959 000000
f5
Session recording rate, in
seconds.
0.05 or 0.1-0.4 if [F] option
activated.
0.5-0.9
1-999
30
*cc Optional checksum *00-*FF