Qzs: enabling/disabling qzss tracking, Function, Command format – Spectra Precision ProFlex 800 Reference Manual User Manual
Page 441: Relevant query command, See also
Advertising
427
Set Command Library
$PASHS,PWR,SLP,0500*6A
Setting the receiver to sleep mode and programming it to be
woken up on July 1st at 12:00:
$PASHS,PWR,SLP,182,1200*7B
QZS: Enabling/Disabling QZSS Tracking
Function
This command is used to enable or disable QZSS tracking.
The QZSS constellation tracking function is off by default.
Command Format
Syntax
$PASHS,QZS,s[*cc]
Parameters
Example
Enabling QZSS tracking:
$PASHS,QZS,ON
Relevant Query
Command
$PASHQ,QZS
$PASHQ,PAR
See Also
$PASHS,CFG
$PASHS,SBA
$PASHS,GPS
$PASHS,GLO
$PASHS,GAL
Parameter
Description
Range
Default
s
Programmable pin ID:
• ON: QZSS satellites tracked and used
• OFF: QZSS satellites not tracked
ON or OFF OFF
*cc
Optional checksum
*00-*FF
Advertising