Spectra Precision ProFlex 800 Reference Manual - Manual (Page 394)

380
Set Command Library
See Also $PASHS,EML,PAR
ETH,OFF: Powering Off the Ethernet Port
Function This command is used to power off the Ethernet port. By
default, the Ethernet port is on.
Turning the Ethernet port may be useful when the receiver is
operated from the internal battery. When the Ethernet port is
not used, turning it off will allow you to extend the battery
operating time.
Command Format Syntax
$PASHS,ETH,OFF[*cc]
Parameters
None.
Example
Turning off the Ethernet port:
$PASHS,ETH,OFF*4F
Relevant Query
Command
$PASHQ,ETH
See Also $PASHS,ETH,ON
$PASHS,ETH,PAR
ETH,ON: Powering On the Ethernet Port
Function This command is used to power on the Ethernet port. By
default, the Ethernet port is on.
Command Format Syntax
$PASHS,ETH,ON[*cc]
Parameters
None.
Example
Turning on the Ethernet port: