Mem: selected memory device, Function, Command format – Spectra Precision ProFlex 800 Reference Manual User Manual
Page 594: Response format, Relevant set command, See also, Met: meteorological unit settings
Advertising
580
Query Command Library
MEM: Selected Memory Device
Function
This command is used to query the memory device used by
the receiver.
Command Format
Syntax
$PASHQ,MEM[*cc]
Response Format
Syntax
$PASHR,MEM,d[*cc]
Parameters
Example
$PASHQ,MEM
$PASHR,MEM,0*2D
Relevant Set
Command
$PASHS,MEM
See also
$PASHQ,FLS
MET: Meteorological Unit Settings
Function
This command allows you to read the current settings on each
serial port allowing the receiver to query the meteorological
unit.
Command Format
Syntax
$PASHQ,MET[*cc]
Response Format
Syntax
In free form, as shown in the example below.
Parameter
Description
Range
d
Memory used:
• 0: Internal memory (NAND Flash) or extended
internal memory
• 2: USB mass storage key
0, 2
*cc
Checksum
*00-*FF
Advertising